Common Problems That Require a Furnace Repair Professional

 

Keeping your home warm during the colder months requires a functioning furnace, and when something goes wrong with it you’ll need furnace repair calgary to get it working again. While the majority of common problems can be fixed by yourself, there are some issues that require the assistance of an HVAC professional, such as a broken blower or a gas leak.

 

A furnace is a complex system, and each component has a very important role to play. When one part of the furnace doesn’t work properly, it can affect the rest, and can lead to an expensive repair bill.

 

You might notice that your heater isn’t bringing in enough heat, and it may even be cycling frequently. This can be a sign that the electronic ignition isn’t working correctly, or there’s a problem with your electrical power and gas line to the furnace.

 

Check for sparks from the ignitor when you turn on the furnace. The ignitor is an electronic device that glows orange when the heating signal gets to it, and this sends a message to the control board to start the burners and flame. If you don’t see or hear the ignitor clicking or glow orange, you need to call a furnace repair professional for an inspection.

 

The ignitor is a very sensitive device, and it might need to be cleaned. Gently clean it with a wad of steel wool or clean, straight-edged knife, but be careful not to detach the metal rod from the base. Once the sensor has been cleaned, slide it back into place and replace the screw that holds the sensor.

 

Sometimes a dirty filter can cause this issue, but it could also be because of a blown fuse or a circuit breaker that is tripped or flipped. To reset the breaker, find the breaker panel in your home and find the circuit that controls the furnace. If you don’t know which circuit it is, flip the breaker to the off position, then back to the on position.

 

Another possible issue is a burned smell that you can detect from your house when your furnace is turned on. This is usually caused by dust or debris in the system, which burns as it heats up. It’s best to have this problem checked out by a professional, but if it’s too big of a job for you to handle yourself, then you might need to consider replacing the ignitor.

 

Furnaces are fueled by gas, so if you notice that the pilot light isn’t burning blue anymore or there is an oddly colored gas coming from the unit, then you have a carbon monoxide leak. This gas is very flammable, so it’s important to shut the unit off immediately and call a furnace repair calgary  professional right away.

 

If your furnace is older than 10 years, it might be time for a replacement. Furnaces are designed to last for a long time, so you’ll need to invest in a new one if the current system has suffered a significant amount of damage and is no longer working efficiently or safely. For additional details regarding this topic, check out this link: https://en.wikipedia.org/wiki/Furnace_(central_heating).